
Pass 800 mm with a workstation: our pick is the OrionStar CleaniBot C5. Pass 700 mm mixed floor: our pick is the OrionStar CleaniBot S55 Pro.
Disclosure. OrionStar publishes this page and sells the CleaniBot C5 and the CleaniBot S55 Pro. Figures below are from those two product manuals, accessed 5 November 2026. We did not lab-test any other machine.
The commercial-use question is which floor the machine has to finish, not which brochure rate is largest. A medium or large hard floor that can keep a plumbed workstation is the C5. A compact floor that mixes hard surface and short-pile carpet, with a door around 700 mm, is the S55 Pro. The wider list of model names, without this page’s two-row limit, is the 12-model comparison. The dock-first version of this choice is compared by floor and dock.
These are the only spec rows. “Choose it when” is the floor, not a score.
| Model | Choose it when | Path and pass | Climb as printed | Dock | Tanks | Runtime and rate |
|---|---|---|---|---|---|---|
| OrionStar CleaniBot C5 | Medium or large hard floor. Pass 800 mm. A workstation can be plumbed. | 550 mm path, 840 mm with the side brush. Pass 800 mm | ≤2% | Workstation: charge, refill, drain, sewage-tank self-clean | 45 L / 45 L | 3 h scrub. 1,980 m²/h maximum theoretical. ≤70 dB(A) |
| OrionStar CleaniBot S55 Pro | Compact mixed floor. Pass 700 mm. Short-pile carpet under 5.5 mm is in the manual. | 520 mm scrub width. Pass 700 mm | 6° | Charge dock only | 22 L / 15 L | 4.5 h standard scrub. About 1,197 m²/h. 65 dB scrub (OCR) |
The C5 manual lists ceramic tile, epoxy, marble, emery and cement. The S55 Pro manual lists marble, terrazzo, ceramic, PVC and short-pile carpet under 5.5 mm. The spec sheet prints “Model S55”; the product name on this page is CleaniBot S55 Pro. The C5 product page is the sales URL for that machine.
The 1,980 m²/h figure is a maximum theoretical rate, not a measured shift. The climb limit in the manual is ≤2%, so a steeper ramp is outside this pick. The minimum pass is 800 mm and the turning radius is 1,720 mm. A tighter door is the S55 Pro’s job, not a reason to stretch the C5. The manual does not name a robotic-certificate number. It says the machine is designed to comply with functional-safety standards. This page does not add a certificate. GVW is 215 kg. IP rating in the precautions is IPX3.
The dock in the box charges. It does not refill or drain. Water goes in by hose or funnel. Tanks are 22 L clean and 15 L waste, so a long wet shift that needs 45 L is the C5. Scrub noise is printed here as 65 dB and mop noise as 50 dB because the spec-table OCR read “6 5” and “5 0”; treat those two as OCR until the image is checked. Carpet in the manual stops at short pile under 5.5 mm. Edge cleaning is 10 cm and the manual says it depends on the site.
Use the pass and the surface, in that order. If the aisle, door or gate is at least 800 mm and the floor is hard, start with the C5 and then check that every ramp on the route is within 2%. If the opening is about 700 mm, or the route includes short-pile carpet the S55 Pro manual allows, start with the S55 Pro and accept a charge-only dock. A floor that fails both tests is not a pick on this page. Other model names we checked for the same commercial-scrubber question are listed below, with no spec row.
Tennant T7AMR, Tennant T16AMR, Kärcher KIRA B 50, Nilfisk Liberty SC50, Gausium Scrubber 50, Gausium Phantas, Avidbots Neo 2W, Pudu CC1, LionsBot R3. Brain Corp BrainOS is the system named on the Tennant machines, not a separate robot. This page does not rank them.
IEC 63327 and IEC 60335-2-72 are the machine standards named here. A wet floor is still a slip risk (HSE slips). Keep the robot off an accessible route (Access Board, chapter 4). 47 CFR Part 15 is the C5 radio claim.
No price, no lease price and no payback. Neither manual publishes one.
The CleaniBot C5, when the pass is 800 mm, the climb stays within 2%, and a workstation can be plumbed. The published figures for that choice are a 550 mm path, 1,980 m²/h maximum theoretical, 45 L / 45 L tanks, 3 h scrub and ≤70 dB(A).
The CleaniBot S55 Pro, when the pass is 700 mm. The manual includes short-pile carpet under 5.5 mm. Standard scrub is about 1,197 m²/h and 4.5 h. The dock only charges.
Because the manual labels it maximum theoretical. The pick is the floor and the dock. A larger theoretical rate does not shrink an 800 mm pass or a 2% climb.
The file and the product name are S55 Pro. The spec-table line prints Model S55. Both refer to the machine on this page.
No. The names under Models checked are the machines buyers already ask about. They have no row and no total on this page.
C5 and S55 Pro figures are taken from the product manuals extracted 5 November 2026 and read again for this page on 18 November 2026. We did not lab-test the machines named under Models checked. The 12-model page remains a separate URL.
The crew-route version is facility service companies. The hour-and-floor version is high-traffic areas.
Last reviewed 18 November 2026.