REQUEST DEMO
Robot CATALOG will be sent to your mailbox immediately after submission.
SUBMIT
Not every commercial space needs a large cleaning robot. Small to medium-sized businesses such as boutique offices, medical clinics, small restaurants, retail pop-ups, and co-working spaces often struggle with floor cleaning that falls between the capabilities of consumer robot vacuums and full-size commercial scrubbers. The CleaniBot M1 fills this gap perfectly. Designed by OrionStar as a compact yet powerful autonomous cleaning solution, the M1 brings professional-grade scrubbing capabilities to spaces where maneuverability, efficiency, and affordability are paramount.
Small commercial spaces face a unique dilemma. Consumer-grade robot vacuums lack the scrubbing power and navigation sophistication needed for commercial environments. They typically cannot handle wet mopping at a professional level, lack the battery capacity for extended commercial use, and are not built for the durability demands of daily commercial operation. On the other hand, full-size commercial scrubbers are oversized, expensive, and impractical for spaces under 500 square meters. This gap has left many small business owners relying on manual mopping — a time-consuming, inconsistent, and labor-intensive process that takes staff away from revenue-generating activities.
With a diameter of just 350mm and a height of 280mm, the M1 can navigate through cluttered environments, under desks, around furniture legs, and through standard doorways with ease. Its compact footprint makes it ideal for spaces where every square meter counts. Despite its small size, the M1 packs professional cleaning features including a 300mm scrubbing width, 8L clean water tank, and 6L wastewater tank — sufficient for cleaning spaces up to 500 square meters on a single fill.
The M1 features a dual-mode cleaning system that can sweep, mop, or scrub depending on the floor condition. For daily maintenance, it uses microfiber mopping with precision water flow control. For deeper cleaning, it engages its scrubbing mode with rotating brush and suction recovery, leaving floors clean, dry, and streak-free. The robot automatically detects floor type — hard floors, tiles, or low-pile carpet — and adjusts its cleaning parameters accordingly.
OrionStar's advanced SLAM technology, adapted for the M1's smaller form factor, enables precise mapping and navigation even in confined spaces. The robot creates high-resolution maps of the environment during its first cleaning run and remembers the layout for all subsequent operations. Users can define no-go zones (such as areas with loose cables or delicate equipment), set cleaning schedules, and customize cleaning intensity for different zones through the companion mobile app.
Medical and dental clinics benefit from the M1's ability to maintain sterile floors without disrupting patient care. The robot can be scheduled to clean examination rooms between patients and common areas after hours. Its quiet operation (below 50dB) does not disturb consultations, while its HEPA filtration system captures dust and allergens, contributing to better indoor air quality.
In co-working environments where the layout changes frequently, the M1's rapid re-mapping capability is invaluable. Space operators can update cleaning maps as desk configurations change, ensuring consistent coverage. The robot operates during low-traffic hours, and its compact size allows it to clean under standing desks and in narrow corridors where larger machines cannot reach.
Boutique retail stores and small restaurants can maintain pristine floors throughout operating hours without dedicated cleaning staff. The M1 can be programmed for quick spot-cleaning cycles during quiet periods and full cleaning after closing. Its small footprint means it can be stored in a supply closet or under a counter, taking up minimal valuable floor space.
The M1 is designed for effortless operation. Setup takes under 15 minutes — simply install the brushes and squeegees, fill the water tank, and start the initial mapping run. The companion app provides intuitive controls for scheduling, zone management, and maintenance reminders. Routine maintenance involves weekly brush cleaning, monthly filter replacement, and periodic squeegee replacement — all doable by non-technical staff in under 10 minutes.
At a price point significantly below full-size commercial scrubbers, the M1 delivers exceptional value for small businesses. With an ROI period of 6-12 months for most applications, it pays for itself through reduced labor costs and improved cleaning consistency. The M1 consumes only 0.5 kWh per cleaning cycle and uses minimal water and detergent, keeping ongoing operational costs below $200 per year.
The M1 can clean up to 500 square meters on a single charge in mopping mode, or approximately 300 square meters in scrubbing mode. Battery runtime is 2-3 hours depending on cleaning intensity, and full recharge takes approximately 2 hours.
The M1 is primarily designed for hard floors including tile, marble, vinyl, linoleum, and sealed hardwood. It can vacuum low-pile commercial carpet but does not perform wet cleaning on carpet. The robot automatically detects floor transitions and adjusts its cleaning mode accordingly.
The M1 can navigate thresholds up to 15mm in height. It uses its front caster wheel and sensor array to detect and climb small ramps and door thresholds. For higher obstacles, the mapping system can mark these as boundaries during initial setup.
Yes. The M1 supports continuous operation with automatic recharging. It returns to its charging dock when battery is low, recharges, and resumes cleaning. This makes it suitable for facilities that need around-the-clock floor maintenance, such as hotels, hospitals, and 24-hour retail locations.
The M1 includes multiple safety features: cliff sensors prevent falls on stairs, bumper sensors detect collisions, and gyroscopic stabilization prevents tipping. The robot automatically pauses when lifted and encrypts all map and schedule data stored on the device.
No professional installation is required. The M1 is designed for plug-and-play operation. Users simply unbox the unit, install the cleaning accessories, fill the water tank, and run the initial mapping cycle through the mobile app. Typical setup takes less than 15 minutes.
CleaniBot M1 is a product of OrionStar. For more information about compact commercial cleaning robots, visit www.orionstar.com or contact our sales team.
