REQUEST DEMO
Robot CATALOG will be sent to your mailbox immediately after submission.
SUBMIT
In the demanding world of industrial facility maintenance, floor cleanliness is not merely an aesthetic concern -- it is a matter of operational safety, equipment longevity, and regulatory compliance. Warehouses, factories, and logistics centers face unique challenges: oil spills, metal shavings, dust accumulation, and heavy foot and vehicle traffic that quickly degrade floor surfaces. Traditional manual scrubbing is labor-intensive, inconsistent, and increasingly difficult to staff in today's tight labor market. The OrionStar CleaniBot C5 is engineered specifically to meet these industrial-grade cleaning demands with full autonomy, heavy-duty performance, and smart operational intelligence.
The CleaniBot C5 is not a light-duty commercial machine. With dimensions of 820 x 680 x 1,130 mm and a net weight of 170 kg, this autonomous scrubber is built to handle the punishing conditions of industrial floors day after day. Its robust construction houses a 550 mm main brush cleaning width that delivers a maximum cleaning capacity of up to 1,980 square meters per hour -- enough to cover the floor area of an entire warehouse shift in a single charge cycle. The large 90-liter combined water tank system (45 liters clean water plus 45 liters wastewater) means fewer refill stops and more continuous uptime, a critical advantage in sprawling logistics centers where clean water access points may be far apart.
The robot's dual-rolling-brush system delivers 25 kg of downward scrubbing pressure, enabling one-pass removal of heavy oil, grease, grime, and stubborn industrial stains. The reported dirt-cleaning rate of approximately 95 percent means that floors emerge genuinely clean after a single pass, rather than requiring repeated scrubbing that wastes time and water. For facilities handling food production, automotive parts, chemicals, or heavy machinery, this level of cleaning performance directly impacts workplace safety by reducing slip hazards and preventing contaminant buildup.
The CleaniBot C5 operates as a fully autonomous cleaning solution from start to finish. It can map areas of up to 10,000 square meters using its smart navigation system, plan optimal cleaning paths with Cloud Learning optimization, and automatically dock at its workstation for refueling, drainage, and self-cleaning at the end of each cycle. This end-to-end autonomy means that facility managers can set cleaning schedules and trust that the robot will execute them without manual intervention -- a significant operational advantage in environments where cleaning staff are scarce or where overnight cleaning is preferred to avoid disrupting daytime operations.
The workstation itself is a marvel of engineering efficiency. It automatically refills clean water, drains wastewater, and performs high-pressure internal tank rinsing. The wastewater tank can self-clean in approximately four minutes, helping to prevent odor and blockage issues that plague traditional scrubbers. Auto-charging ensures the robot is always ready for the next shift, enabling continuous multi-shift operation in venues that require round-the-clock cleanliness.
The CleaniBot C5 supports three primary cleaning modes: scrubbing for deep stain removal, dust-mopping for dry surface cleaning, and water absorption for wet pickup. This versatility allows the machine to sweep, scrub, and vacuum or mop in a single operational cycle, dramatically reducing the time required to achieve clean floors. The ability to pick up debris up to approximately 3 cm in height means that small loose objects, packaging debris, and production waste do not require pre-cleaning before the robot operates. An integrated 1.8-liter dust bin handles dry waste collection, while the dual-tank system manages wet cleaning and recovery.
The battery system is designed for extended industrial shifts. With a 24 V, 80 Ah battery, the C5 delivers approximately 3 hours of scrubbing runtime and up to 8 hours of mopping runtime. Fast charging at approximately 1.5 hours means that even in demanding multi-shift operations, the robot can return to service quickly after recharging.
Navigating an industrial environment requires more than just cleaning power -- it requires intelligent mobility. The CleaniBot C5 operates at a maximum speed of 1.2 m/s, which balances productivity with safety. It can climb obstacles up to 15 mm in height and manage slopes of up to 5 degrees when loaded and 8 degrees when unloaded, allowing it to transition between different zones within a facility. With a minimum passing width of approximately 880 mm, it can navigate standard corridors and doorways commonly found in industrial buildings.
Safety is paramount in environments where people, forklifts, and equipment share space. The C5 uses multiple sensors and a smart obstacle-avoidance system that detects and navigates around people, pallets, machinery, and other obstacles. Its noise level of less than 68 dB(A) ensures that it does not contribute to noise pollution in busy work areas, and it can operate safely alongside personnel without causing disruption.
Industrial equipment must be built to last, and the CleaniBot C5 delivers on this requirement. Its fan is rated for more than 10,000 hours of operation, and the overall design emphasizes durability and reduced maintenance. By replacing manual scrubbing with autonomous operation, facilities can achieve predictable cleaning schedules, consistent quality, and reduced labor costs. The optional mobile water tanks mean that facilities do not need building plumbing modifications, simplifying deployment and relocation.
The return on investment for the CleaniBot C5 is compelling. Facilities typically see a significant reduction in labor hours dedicated to floor cleaning, improved cleanliness consistency, and reduced water and chemical usage through optimized cleaning paths and automated dispensing. For industrial facilities that operate multiple shifts, the robot's ability to work autonomously overnight or between shifts maximizes asset utilization without adding labor costs.
The CleaniBot C5 excels in a wide range of industrial environments: factories with oil-stained production floors, logistics warehouses requiring daily sweeping and scrubbing, automotive plants where cleanliness affects quality control, food processing facilities with strict hygiene standards, and large distribution centers where manual cleaning is simply impractical at scale. It is equally effective in heavy-traffic commercial environments such as shopping malls, hospitals, and transportation hubs where large floor areas require consistent, high-quality cleaning.
Q1: What is the maximum area the CleaniBot C5 can clean on a single charge?
A: In scrubbing mode, the C5 can clean approximately 3 hours continuously, covering up to 5,940 square meters depending on cleaning conditions. In mopping mode, runtime extends to 8 hours for even larger coverage areas.
Q2: Does the CleaniBot C5 require special floor preparation before cleaning?
A: No. The C5 can pick up debris up to 3 cm in height, so small loose objects do not need to be pre-cleared. However, large obstacles such as pallets or equipment should be moved or the robot's cleaning path should be programmed to avoid them.
Q3: How does the water refill and drainage system work?
A: The C5 automatically docks at its workstation for clean water refilling, wastewater discharge, and tank self-cleaning. The process takes approximately 4 minutes for tank rinsing. Mobile water tanks are available as an option for facilities without fixed plumbing connections.
Q4: Can the CleaniBot C5 operate safely around workers and moving equipment?
A: Yes. The robot is equipped with a multi-sensor obstacle avoidance system that detects people, forklifts, pallets, and other obstacles. It operates at a noise level below 68 dB and includes emergency stop functionality for additional safety.
Q5: What maintenance does the CleaniBot C5 require?
A: The C5 is designed for low maintenance. The fan is rated for 10,000+ hours, the workstation performs automatic tank cleaning, and the overall mechanical design emphasizes durability. Regular tasks include checking brush wear, cleaning sensors, and monitoring water quality. The self-cleaning wastewater tank helps prevent odor and blockage issues.
Q6: Can the CleaniBot C5 handle oil and grease stains on factory floors?
A: Yes. With 25 kg of downward scrubbing pressure and a dual-rolling-brush system, the C5 achieves a reported dirt-cleaning rate of approximately 95 percent, including removal of heavy oil, grease, and grime in a single pass.
Q7: What is the maximum slope the C5 can handle?
A: The C5 can manage slopes up to 5 degrees when loaded and up to 8 degrees when unloaded, making it suitable for most industrial facility layouts including ramps between loading docks and warehouse floors.
